Reference Guide

Diagnosing the Hub through the ASCII Console
The ASCII console provides tests and indicators that can be used to monitor
the hub and its network connections. For more details about these tests and
indicators.
Each hub contains a 9-pin serial (RS-232-C) port that is used to connect the
PC. The hub can be controlled from a PC running an ASCII terminal such as
the Windows Terminal program.
To connect a PC directly to the RS-232 port, proceed as follows:
1. Attach the console cable supplied with the hub to the RS-232 port on
the back of the hub.
2. Attach the other end of the serial cable to an available 9-pin serial
port on the personal computer.
If only a 25-pin serial port is available, use a 9-pin-to-25-pin port
adapter (not supplied).
PC running
Windows Terminal
Serial cable included with
the hub
Troubleshooting
10