Reference Guide

2. Verify that the Hub Works

Your hub uses power from an external DC power supply. To provide power

to the hub, follow these steps:

1. Plug the DC power supply into the hub’s Power connector.

Note If your installation requires a different power cord than the one supplied

with the hub, contact your HP-authorized LAN dealer or your local

HP sales office.

2. Plug the power cord into the power supply.

3. Plug the power cord into an AC power source. When installing the

Hub-7E, note that the AC outlet must be located near the equipment

and should be easily accessible.

Note The hub does not have a power switch; it is powered on when the power

cord is plugged in.

Power receptacle

on the back of the

hub.

DC Power cable from external

power supply

2. Verify that the Hub Works