Reference Guide

2-1
2
Graphical Software
■ Stack Manager Extended Features
■ HP Interconnect Manager Features
When you install an HP 100VG SNMP/Bridge Module in your AdvanceStack
100VG Hub, the functionality from both out-of-band management (HP Stack
Manager) and in-band management (from an SNMP network management
station) is now available. Without the HP 100VG SNMP/Bridge Module
installed, the hub cannot be directly managed in-band. See your hub manual
if you want a description of the basic functionality that is possible without the
HP 100VG SNMP/Bridge module installed.
HP Stack Manager Extended Features
HP Stack Manager is the Windows-based software that is supplied with the
HP AdvanceStack hubs. HP Stack Manager is graphical and can be used
out-of-band only.
With the HP 100VG SNMP/Bridge Module installed in an HP AdvanceStack
100VG Hub, the capabilities of the HP Stack Manager software are extended
to include these features:
■ module bundle connection
■ bridge configuration
■ IP configuration
■ network test
■ factory reset
■ additional security features