Manualshelf

Reference Guide

ManualsBrandsHP ManualsNetworking100VG
21222324252627282930
3-1
3
ASCII Console
■ ASCII Console Features
■ Connecting to the ASCII Console
■ Using the ASCII Console
When you install an HP 100VG SNMP/Bridge Module in your AdvanceStack
100VG Hub, you can use the ASCII console provided in the firmware of the
SNMP/Bridge Module. This chapter describes the features available and how
to make a connection to the ASCII console.
ASCII Console Features
The ASCII console has similar features to HP Stack Manager. You can access
the ASCII console either in-band by using Telnet, or out-of-band by using a
serial cable. Because the features are described in the previous chapter, only
a brief description of the commands are listed in the sample session below.
For specific information about how to use a feature, consult the online help
in the ASCII console.