Reference Guide

3-2
ASCII Console
ASCII Console Features
ASCII Console
=>HE
HElp [cmd] or ? [cmd] - displays this list of hub commands or detailed help for a specific command.
ADdress <ET|TR|SH> - Sets address display mode in Ethernet (default at startup) or Token Ring.
AUxiliary - connects to card attached to SNMP Module.
BOx configuration - allows configuration of the box uplink ports.
BRidge - configures bridging status & aging time.
BUndling - configures the cable settings for the hub.
CHainlist - displays a list of hubs on the management chain.
COunter [port] - displays all port counters or counters for a specific port.
DIsconnect - terminates this console session.
HUbselect <hub_number> - accesses a 100VG hub without an SNMP card on the distributed management chain.
INtruder - displays the intruder log for the last 20 intruder violations.
IPconfig - configures Internet Protocol parameters.
MAnagers [SHow] - edits or displays the authorized managers list.
NUlladdress - configures how end nodes that use null address training packets will be handled.
PAssword - changes the hub access password.
POrt <port>
<ON|OFF|HIgh|NOrmal|SHow>- enables, disables a port; change a port priority; or show port status
PIng - performs network-layer ICMP Echo Request test.
REset - resets hub and runs power-on self-test.
RLink <ON|OFF> - allows redundant links to be turned on or off.
SEcure <port|SHow|CLear> - configures hub security, show the settings, or clears alarms.
<port> can be a port number or ALL.
SPeed <new speed> - changes the console baud rate.
STatus - displays the status of the hub.
TRaining <port><P|A|C> - sets the permitted training level of a port to Private, Any device, or Cascade allowed.
TEstlink - performs data-link layer communication test.
UPlinkselect <A|B> - selects the active uplink port.
XPing - performs an IPX link test.
Entering Ctrl-c during any command terminates that command.
=>