User's Manual

basic functionsbasic functionsbasic functionsbasic functionsbasic functionsbasic functionsbasic functions
21
adjust volume
hp fax 1010 series
SUPER FINE
works well for documents containing extremely fine detail. SUPER FINE
only works if the remote machine also has the SUPER FINE feature.
Tip! SUPER FINE mode is not used when sending documents scanned into
memory (i.e., Broadcasting and Delayed Fax). If you are sending document using
one of these methods, SUPER FINE will be changed back to FINE even though
you selected SUPER FINE.
If the
Scan & Fax Mode
light is on and SUPER FINE is chosen, the fax will be sent as
if the light were off.
3
Press
Ans.Mode/Contrast
repeatedly to select the option you want.
NORMAL
works well for normal handwritten, typed, or printed documents.
LIGHTEN
works with very dark print.
DARKEN
works with light print or faint pencil markings.
PHOTO
is used when faxing photographs or other documents containing color or
gray shades. When Photo is chosen, the resolution is automatically set to FINE.
4
Dial the number and press
Start/Enter
or press
Copy
.
When sending/copying is finished, resolution/contrast automatically returns to default.
adjust volume
You can adjust the volume level for both the ringer and the speaker (the speaker is used for
Loudspeaker).
ringer volume
Press

when the fax is in Ready mode to adjust the volume of the ringer.
Whenever you press the button, it will increase or decrease the volume.
• The volume
0
indicates that the machine will not ring when a call is received.
speaker volume
1
Press
Loudspeaker
.
2
Then press

to adjust the volume of the speaker.
automatic fax redial
When you send a fax, if the number you have dialed is busy or there is no answer, the
machine will attempt to redial the number every three minutes up to two times.
Before redialing, the display shows
To redial now, press Start/Enter
.
If you want to redial the number immediately, press
Start/Enter
.
Or, press
Cancel
to cancel redialing and then the machine returns to Ready mode.