User's Manual

Figure 20 Slot numbering in the base module for all other EML configurations
2. Array targets for the barcode scanner1. Robot park zone
4. Software demarcation between upper and lower modules
for slot counting purposes
3. Reserved slots-can be used for cleaning cartridges or
data cartridges
6. Slots unavailable for use when the library floor is installed
in this module
5. Slots available for data cartridges
8. Expansion identification label7. Tape drives
10. Column numbering9. Row numbering
12. 8U base module11. Load port slots
14. Tape drive numbering13. 4U base module
Figure 21 Slot numbering in the tape drive expansion module
2. Array targets1. Slots available for data cartridges
4. Tape drive numbering3. Slots unavailable for use when the library floor is installed
in this module
6. Expansion identification label5. Tape drives
8. Column numbering7. Row numbering
9. Load port slots
Numbering 25