Maintenance and Service Guide

a. The panel is secured to the display enclosure with long strips of tape. Use a tweezer to grasp the tape
just above each hinge (1).
b. Pull the tape out from behind the panel (2).
NOTE: You have to pull on the tape multiple times before it is completely removed.
Display adhesive is available using spare part number L28524-001.
c. Swing the top edge of the display panel (1) forward until the panel rests upside down on the
keyboard.
d. Release the adhesive support strip (2) that secures the display panel cable connector to the display
panel.
e. Press the release lever on the side of the connector (3).
f. Disconnect the display panel cable (4) from the display panel.
58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts