Maintenance and Service Guide

Solid-state drive
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
512 GB, PCIe L52006-001
512 GB, PCIe, TLC L56705-001
256 GB, SATA-3, TLC L52004-001
256 GB, PCIe L52005-001
128 GB, SATA-3, TLC L52003-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 30).
3. Remove the battery (see Battery on page 32).
Remove the solid-state drive module:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the drive to the computer.
2. Remove the drive (2) by pulling it away from the socket.
Reverse this procedure to reassemble and install the solid-state drive.
Component replacement procedures 37