Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
Card reader board
Table 5-9 Card reader board and cable descriptions and part numbers
Description Spare part number
Card reader board L52030-001
Card reader board cable L52027-001
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 30).
3. Remove the battery (see Battery on page 32).
Remove the card reader board:
1. Disconnect the cable from the ZIF connector on the card reader board (1).
2. Remove the Phillips M2.0 × 2.8 screw (2) that secures the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the card reader board.
Component replacement procedures 41