Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
(4) USB board cable
(5) Keyboard cable
(6) TouchPad cable
(7) TouchPad button board cable
(8) Speaker cable
(9) Display cable
(10) Audio board cable
(11) Card reader board cable
(12) WLAN antennas from the WLAN module
(13) Keyboard backlight cable (select models only)
2. Remove the three Phillips M2.0 × 2.8 screws (1) that secure the system board to the computer.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts