Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
b. Pull the tape out from behind the left and right sides of the panel (2).
NOTE: You have to pull on the tape multiple times before it is completely removed.
Display panel adhesive tape is available using spare part number L52528-001.
c. Rotate the display panel upside down next to the display back cover.
d. Release the adhesive support strip (1) that secures the display panel cable connector to the
display panel.
58 Chapter 5 Removal and replacement procedures for authorized service provider parts