Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
e. Disconnect the display panel cable (2) from the display panel, and then remove the display panel
(3).
The display panel is available using the following spare part numbers:
L51997-001 – FHD, anti glare, SVA, non-touch
L51998-001 – FHD, anti glare, UWVA, non-touch
L52156-001 – FHD, BrightView, UWVA, touch-on panel (TOP)
L51999-001 – HD, anti glare, SVA, non-touch
L52000-001 – HD, BrightView, SVA, non-touch
L52001-001 – HD, BrightView, SVA, touch-on panel (TOP)
12. If it is necessary to remove the display hinges:
a. Remove the Phillips M2.0 × 2.8 screw (1) from the top of each hinge.
b. Remove the three Phillips M2.5 × 3.5 screws (2) from the bottom of each hinge.
Component replacement procedures 59