Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
c. Remove the display hinges from the display back cover (3).
The display hinges are available using spare part number L52009-001.
13. If it is necessary to remove the display panel cable:
a. Lift the tape from atop the connector on the webcam module (1), and then disconnect the cable
from the module (2).
b. Peel the cable o the inside of the display back cover (3). The cable is secured with adhesive.
60 Chapter 5 Removal and replacement procedures for authorized service provider parts