Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
c. Remove the display panel cable (4).
The display panel cable is available using the following spare part numbers:
L52015-001 – non-touch display assembly
L52016-001 – touch display assembly
14. If it is necessary to remove the wireless cables and antennas:
a. Detach the wireless antennas (1) from the display back cover. The antennas are secured with
adhesive.
b. Release the wireless antenna cables from the retention clips (2) and routing channels built into the
sides of the display back cover.
Component replacement procedures 61