Maintenance and Service Guide
Table Of Contents
- Product description
- Getting to know your computer
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for authorized service provider parts
- Component replacement procedures
- Preparation for disassembly
- Bottom cover
- Battery
- Hard drive
- WLAN module
- Solid-state drive
- Optane memory module
- Memory module
- Solid-state drive board
- Card reader board
- USB board
- Audio board
- TouchPad button board
- Fingerprint reader
- Fan
- Heat sink
- System board
- Display assembly
- Power connector (DC-in) cable
- Speakers
- Top cover with keyboard
- Component replacement procedures
- Using Setup Utility (BIOS)
- Using HP PC Hardware Diagnostics
- Backing up, restoring, and recovering
- Specifications
- Power cord set requirements
- Recycling
- Index
c. Remove the antennas from the display back cover (3).
The wireless cables and antennas are available using spare part number L52018-001 for dual
antennas or L52017-001 for single antennas..
NOTE: If it is necessary to replace the display bezel or any of the display assembly subcomponents, please
see the instructions above.
Reverse this procedure to reassemble and install the display assembly.
62 Chapter 5 Removal and replacement procedures for authorized service provider parts