Maintenance and Service Guide

Power connector
Table 5-16 Power connector description and part number
Description Spare part number
Power connector L51346-001
Before removing the power connector, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (see Bottom cover on page 30).
3. Remove the battery (see Battery on page 32).
4. Remove the display (see Display assembly on page 59).
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the power connector and cable from the computer (2).
Reverse this procedure to install the power connector cable.
Component replacement procedures 67