User's Manual

ENWW Configure Device menu 155
PERSONALITY *AUTO
PCL
PS
Selects the default printer language (personality).
Possible values are determined by which valid languages
are installed in the printer.
Normally, you should not change the printer language. If
you change it to a specific printer language, the printer
will not switch automatically from one language to
another unless specific software commands are sent to
the printer.
CLEARABLE WARNINGS *JOB
ON
Sets the amount of time that a clearable warning is
shown on the printer control panel display.
JOB: The clearable warning message appears until the
end of the job that generated the message.
ON: The clearable warning message appears until you
press (SELECT button).
AUTO CONTINUE OFF
*ON
Determines how the printer reacts to errors. If the printer
is on a network, you probably want to turn
AUTO
CONTINUE
to ON.
ON: If an error occurs that prevents printing, the message
appears on the printer control panel display, and the
printer goes offline for 10 seconds before returning
online.
OFF: If an error occurs that prevents printing, the
message remains on the printer control panel display,
and the printer remains offline until you press
(SELECT button).
CARTRIDGE LOW *CONTINUE
STOP
Determines how the printer behaves if the print cartridge
is low. The ORDER CARTRIDGE message first appears when
about 10 percent of the toner remains in the print
cartridge at 5 percent coverage (about 600 pages
remaining). Print quality is not guaranteed if you print
after receiving this message.
CONTINUE: The printer continues to print, and the
message appears until you replace the print cartridge.
STOP: The printer pauses printing until you replace the
print cartridge or press
(SELECT button) before each
job to print it. The message appears until you replace the
print cartridge.
CARTRIDGE OUT *CONTINUE
STOP
Determines how the printer reacts if the print cartridge is
empty.
CONTINUE: The printer continues to print, and the
REPLACE CARTRIDGE message appears until you replace
the print cartridge. HP does not guarantee print quality if
you select CONTINUE after a REPLACE CARTRIDGE
condition. Replace the print cartridge as soon as possible
to ensure print quality.
STOP: The printer stops printing until you replace the print
cartridge.
If the end of drum life is reached, the printer stops,
regardless of the CARTRIDGE OUT setting.
Item Values Explanation