Installation manual

Using the Configuration Editor

The Configuration Editor provides access to a hierarchy of menus and

screens that include any parameters you need for customizing the router

beyond the ‘‘getting started’’ level. Using this editor, you can customize

all parameters needed to integrate the router into your system (includ-

ing the subset of parameters you can access through Quick Configura-

tion).

To use the Configuration Editor, press [3] at the Main Menu screen. For

details about using the Configuration Editor, refer to the User’s Guide.

For details about the parameters you can access using the Configuration

Editor, refer to the Operator’s Reference.

Note When you create or change a configuration, the new values are not put

into effect until you reboot the router module. This reinitializes the

router module with the new configuration parameters. After creating or

modifying a configuration using Configuration Editor, you must reboot

the router module to activate the new configuration. To reboot the

router, use the NCL Boot command.

Rebooting the router module disconnects it from the console. To

reconnect, refer to step 5 on page 1-23.

Setup

Installation

1. Create or Modify a Router Configuration.

2-7