Reference Guide

Rack or Cabinet Mounting

Warning The rack or cabinet should be adequately secured to prevent it

from becoming unstable and/or falling over.

1. Using a flat-headed or Torx T-10 screwdriver, attach the mounting

brackets to the hub with 10-mm M3 screws (included in the

accessory kit). Note that the hub’s case and the mounting brackets

are designed to allow you to rack mount the hub with either the back

or the front facing out.

2. Position the hub in the rack or cabinet and slide it up or down until

the rack holes line up with the bracket holes.

3. Then attach the hub to the rack with 5/8-inch number 12-24 screws

included in the accessory kit with a Phillips crosshead screwdriver.

(Some cabinets require number 10-32 screws instead, available as

part number 2680-0302. Make sure you have screws that fit your

cabinet or rack before mounting the hub.)

5/8-inch number

12-24 screws

Mounting

bracket

Front facing out

10-mm M3

screws

Installing the Hub

1-9