Instruction Manual

DescriptionItem
PCI power connector24
TPM connector25
PCIe riser board connectors (2)26
HP Systems Insight Display and LEDs
The display provides status for all internal LEDs and enables diagnosis with the access panel
installed.
To view the LEDs, access the HP Systems Insight Display.
StatusDescriptionItem
To determine Power cap status, see HP Systems
Insight Display LEDs and Internal Health LED
Combinations.
Power cap LED1
Green = Network link existsNIC LEDs2
Flashing green = Network link and activity exist
Off = No link to network exists
If power is off, the front panel LED is not active. For
status, see Rear Panel LEDs and Buttons.
Green = AMP mode enabledAMP status3
Amber = Failover
Flashing amber = Invalid configuration
Off = AMP mode disabled
Amber = FailureAll other LEDs
Off = Normal.
For possible failure causes, see HP Systems Insight
Display LEDs and Internal Health LED Combinations.
NOTE: The HP Systems Insight Display LEDs represent the system board layout.
VLS12200 Node Components, LEDs, and Buttons 155