Maintenance and Service Guide

7. Slide the hard drive out of the cage (2).
Installing a 3.5-inch hard drive
1. Prepare the computer for disassembly (Preparation for disassembly on page 16).
2. Remove the access panel (Access panel on page 17)
3. If installed, remove the optical drive (Removing the optical drive on page 25)
4. Remove the front bezel (Front bezel on page 23)
5. Remove the drive cage (Removing the drive cage on page 28)
6. Slide the hard drive into the drive cage (1).
7. Install the three Torx screws (2) that secure the drive to the drive cage.
8. Reassemble the computer.
30 Chapter 4 Removal and replacement procedures