Maintenance and Service Guide

Fan duct
1. Prepare the computer for disassembly (Preparation for disassembly on page 16).
2. Remove the access panel (Access panel on page 17).
3. Remove the front bezel (Front bezel on page 23)
4. If installed, remove the optical drive (Removing the optical drive on page 25)
5. Remove the drive cage (Removing the drive cage on page 28)
6. Remove the power supply cable from the clip on the duct (1).
7. Pull the two tabs outward (2), and the lift the duct out of the computer (3).
To replace the fan duct, reverse the removal procedures.
36 Chapter 4 Removal and replacement procedures