Maintenance and Service Guide

●
F10: Save and exit
●
Esc: Exit Setup.
●
Enter: Select or enter submenu
●
Up/Down: Select item
●
Left/Right: Select screen
4. To apply and save changes, select Exit > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To restore settings to original values, select Restore Factory Defaults as Default.
NOTE: Settings in the Security menu are not modied by Apply Defaults. Those values are reset by
Restore Security Settings to Factory Defaults at the bottom of the Security menu.
NOTE: Not all settings shown in the following sections are available for all models
CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
because the settings could become corrupted. It is safe to turn o the computer only after exiting the F10
Setup screen.
Computer Setup–Main
NOTE: Support for specic Computer Setup options may vary depending on the hardware conguration.
Table 6-1 Computer Setup–Main menu
Option Description
System Information
●
System Time (editable)
●
System Date (editable)
●
Product Name
●
System Family
●
Product Number
●
System Board ID
●
Asset Tag
●
Ownership Tag
●
Born On Date
●
Processor Type
●
Total Memory
●
BIOS Vendor
●
BIOS Revision
●
Device Firmware Revision (select to see Intel ME and Graphic Output Protocol revision numbers)
●
Serial Number
●
UUID
●
Serial Board CT Number
●
Factory Installed OS
74 Chapter 6 Computer Setup (F10) Utility