Maintenance and Service Guide
Table 6-4 Computer Setup–Boot Options menu (continued)
Option Heading
Up and Down arrow keys select a device. F5 and F6 keys move the device up or down. Boot capability is
disabled if the device is marked with an exclamation mark. When Legacy Support is enabled, UEFI boot
order and Legacy boot order are both available and UEFI boot order has higher priority than Legacy boot
order.
Legacy Boot Order Specify the order in which legacy boot sources (such as a network interface card, internal hard drive, USB
optical drive, or internal optical drive) are checked for a bootable operating system image. Each device on
the list may be individually excluded from or included for consideration as a bootable operating system
source.
This option is grayed out if Legacy Support is set to disabled.
NOTE: To drag a device to a preferred place, press Enter. To remove the device from consideration as a
bootable device, press F5.
Computer Setup—Exit
NOTE: Support for specic Computer Setup options may vary depending on the hardware conguration.
Table 6-5 Computer Setup–Exit menu
Option Heading
Save Changes and Exit Exit System Setup and save your changes.
Ignore Changes and Exit Exit without saving changes.
Load Setup Defaults Load setup default values for all setup items.
Apply Defaults and Exit Load default values for all setup items and exit setup and save your changes.
Save Current Settings as
Default
Save current setup settings as the default settings.
Restore Factory Settings
as Default
Restore factory settings as the default settings
Computer Setup (F10) Utilities 79