- Hewlett-Packard Printer User Manual

ManualsBrandsHP ManualsFax Machine1250

Retirez le carton et le ruban adhésif

Commencez ici

Veillez à retirer tous les rubans adhésifs et les cartons

à l’intérieur de l’imprimante.

HP Fax 1250 Setup Guide

Repérez les composants

Déployez les bacs à papier

Cache du panneau de commande

Start Here

Make sure to remove all tape and cardboard on the

inside of the device.

Remove tape and cardboard

Guide de conﬁguration du télécopieur HP 1250

Locate components

control panel faceplate

Unfold paper trays

HP Officejet 4300 All-in-One series

User Guide

cab

Summary of content (8 pages)

PAGE 1
Start Here 1 Commencez ici Remove tape and cardboard Retirez le carton et le ruban adhésif a b Make sure to remove all tape and cardboard on the inside of the device. Veillez à retirer tous les rubans adhésifs et les cartons à l’intérieur de l’imprimante.
PAGE 2
4 Attach the control panel faceplate Installez le cache du panneau de commande a a Fit the faceplate tabs into the slots on top of the device. b Rotate the faceplate down. Then firmly press down on both front corners until they snap into place. IMPORTANT: Make sure that all edges are even with the device, and that all buttons come through the holes in the faceplate.
PAGE 3
6 7 Connect the power cord and adapter Branchez le cordon d’alimentation et l’adaptateur Connect the supplied phone cord Branchement du cordon téléphonique fourni a a (1-LINE) Connect one end of the supplied phone cord to the phone port (1-LINE) and the other to a wall jack. b (2-EXT) Follow the step below if you want to connect your phone/answering machine to the HP Fax. Remove the plug from the (2-EXT) port, and then plug your answering machine cord into the port.
PAGE 4
8 Press the on button and configure Appuyez sur le bouton Activer et configurez le périphérique a After you press the On button, wait for the language prompt before continuing. b To set the language for the display, use the arrow keys to select your language, press OK, and then confirm. Use the arrow keys to select your country/region, press OK, and then confirm. a Après avoir appuyé sur le bouton Activer, attendez l’invite de la langue avant de continuer.
PAGE 5
11 Insert the tri-color print cartridge Insérez la cartouche d’impression couleur a IMPORTANT: The device must be On before you can insert the print cartridges. a Slide the tri-color print cartridge into the left slot as shown. b Push the top part of the cartridge firmly up and into the slot until it snaps into place. b IMPORTANT : Le périphérique doit être sous tension pour que vous puissez insérer les cartouches d’impression.
PAGE 6
13 Align the print cartridges Alignez les cartouches d’impression a a Press OK to print the alignment page. (Make sure you have loaded plain white paper in the bottom tray). b Remove the alignment page from the output tray. c Place the alignment page facedown into the document feeder as shown in diagram c. d Press OK to scan the alignment page. After the page is scanned, alignment is complete.
PAGE 7
14 Set the date and time Configurez la date et l’heure a Press the Setup button, press 5, and then press 3. Enter date: appears on the LCD screen. b Enter the date in mm-dd-yy format using the numeric keypad, and then press OK button. Enter time: appears on the LCD screen. c Enter the time in the hh:mm format using the numeric keypad. When prompted, press 1 for AM or 2 for PM. a Appuyez sur le bouton Configurer, sur 5, puis sur 3. Saisie de la date : s’affiche sur l’écran LCD.
PAGE 8
Troubleshooting *Q8096-90105* *Q8096-90105* Dépannage Q8096-90105 Problem: The paper jam message appears on the display. Action: Lift the control panel and gently remove any jammed paper. Make sure that you removed all packaging tape. After you have cleared the jam, make sure you press the control panel back into place. You may also need to remove any jammed paper from the rear access door or from inside the device. Problème : Le message Bourrage papier s’affiche à l’écran.