Hardware Reference Guide

4. Press the release lever on the back of the drive (1), and then slide the drive through the front bezel (2).
Installing a 9.5 mm slim optical drive
1. Prepare the computer for disassembly. See Preparing for disassembly on page 6.
2. Remove the computer access panel. See Removing the computer access panel on page 6.
3. Remove the front bezel if you are installing a drive in a bay covered by a bezel blank, and then remove
the bezel blank. See Removing a slim optical drive bezel blank on page 9 for more information.
4. Align the small pin on the release latch with the small hole on the side of the drive and press the latch
rmly onto the drive.
22 Chapter 2 Hardware upgrades