HP Engage Imaging Barcode Scanner II User Guide

Caps Lock state
This option species the format in which the barcode scanner sends character data. This applies to keyboard
wedge interfaces. This does not apply when an alternate key encoding keyboard is selected.
Enter or exit programming mode
— — — — — — — — — — — — — — — — — — — — — — — —
Caps Lock State = Caps Lock o (default)
— — — — — — — — — — — — — — — — — — — — — — — —
Caps Lock state = Caps Lock on
— — — — — — — — — — — — — — — — — — — — — — — —
Caps Lock state = Auto Caps Lock enable
Reading parameters
Move the barcode scanner toward the target and center the aiming pattern and illumination system to
capture and decode the image. For more information, see Using the scanner on page 4.
The aiming system briey switches o after image capture. If no code is detected, the aiming system switches
on before the next capture. The illuminator remains on until the symbol is decoded.
When scanning symbols, adjust the distance at which you are holding the barcode scanner until the image is
captured.
Reading parameters 15