HP Engage Imaging Barcode Scanner II User Guide

Pick mode
Pick mode species the ability of the barcode scanner to decode labels only when they are close to the center
of the aiming pattern, which is the area indicated by the red cross. Pick mode is a decoding and transmission
process in which barcodes that are not within the congurable distance from the center of the aiming pattern
are not acknowledged or transmitted to the host. It is active only while the scanner is in Trigger Single mode.
If the scanner switches to a dierent read mode, Pick mode is automatically disabled.
NOTE: This feature is not compatible with Multiple Labels Reading in a volume.
Enter or exit Programming mode
— — — — — — — — — — — — — — — — — — — — — — — —
Pick mode = Disable (default)
— — — — — — — — — — — — — — — — — — — — — — — —
Pick mode = Enable
Multiple label reading
The barcode scanner oers a number of options for multiple label reading. See the HP Barcode Scanner D-
Series Conguration Utility for descriptions of these features and programming labels.
Operating modes 19