HP Engage One Column Printer User Guide
6. Continue until you are asked to save new parameters. Enter a long click for yes.
7. To verify the new settings with a diagnostic printout, restart the printer, open the receipt cover, and then
press and hold the paper feed button while closing the receipt cover.
Energy-savings mode
This function makes it possible to set the number of minutes that the printer remains idle before entering a low-
power (1 W) idle state.
1. Enter the conguration menu. See Entering conguration mode on page 9.
2. Select Set Firmware Features.
3. Scroll to Set Energy Savings Timeout Value, and then select Yes.
4. Enter up to six short clicks to set the timeout value.
● 1 click: No timeout (default)
● 2 clicks: 15 minute timeout
● 3 clicks: 30 minute timeout
● 4 clicks: 60 minute timeout
● 5 clicks: 120 minute timeout
● 6 clicks: 240 minute timeout
5. Restart the printer.
To exit energy-savings mode, press the paper feed button.
Monochrome paper print density
This function makes it possible to adjust the energy level of the printhead to darken the printout or adjust for
paper variations. Only make an adjustment when necessary. The factory setting is 100%.
IMPORTANT: Choose an energy level no higher than necessary to achieve a dark printout. Running at a higher
energy level reduces the printhead life and might void your warranty.
10 Chapter 3 Conguring the printer