HP Engage One Column Printer User Guide

Light
The green light indicates basic information about the printer status. A solid green light means that the printer is
on and operating normally. A blinking light means that the printer needs operator assistance, probably because
the cover is not fully shut. Try opening and closing the cover until the ashing stops, or see Troubleshooting the
printer on page 12.
Communication interfaces
You can connect the printer to the system via USB.
Labels
The model ID is located on the model label attached to the inside of the printer.
Startup routine
A single beep means that the printer has successfully completed its startup routine. It beeps after you turn on or
restart it.
If the printer beeps twice, it might be experiencing a problem. See Troubleshooting the printer on page 12.
Loading the printer receipt paper
1. Open the receipt cover by pushing up evenly on each side of the cover until it unsnaps (1).
2. Remove the test printout or used paper roll if necessary. Otherwise, remove the used paper roll.
3. Place the receipt paper into the paper compartment on the spindle so that it unrolls from the inside (2).
Leave a few inches of paper sticking out of the printer. To prevent jamming, make sure the paper is
between the guidelines.
2 Chapter 1 Getting started