System information

Dock components
The following sections describe the removal and replacement procedure of the dock components
Base enclosure
Description Spare part number
Base enclosure for use in silver models 732270-001
Base enclosure for use in red models 733904-001
Before disassembling the keyboard dock, follow these steps:
1. Shut down the keyboard dock. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
Releasing the tablet from the keyboard dock
on page 34).
Remove the base enclosure:
1. Remove the two upper rubber feet (2), and then the two Phillips PM2.5×6.0 screws (3)
underneath.
2. Separate and release the base enclosure (4) from the dock.
Reverse this procedure to install the base enclosure.
Dock components
35