User's Guide
Setting Setup Utility (BIOS) passwords
Table 8-2 Types of BIOS passwords and their functions
Password Function
Administrator password ● Must be entered each time you access Setup Utility (BIOS).
● If you forget your administrator password, you cannot
access Setup Utility (BIOS).
Power-on password ● Must be entered each time you turn on or restart the
computer.
● If you forget your power-on password, you cannot turn on or
restart the computer.
To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):
IMPORTANT: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the
computer from operating properly.
1. Start Setup Utility (BIOS):
● Computers or tablets with keyboards:
▲ Turn on or restart the computer, quickly press esc, and then press f10.
● Tablets without keyboards:
1. Turn on or restart the tablet, and then quickly hold down the volume up button.
- or -
Turn on or restart the tablet, and then quickly hold down the volume down button.
- or -
Turn on or restart the tablet, and then quickly hold down the Windows button.
2. Tap f10.
2. Select Security, and then follow the on-screen instructions.
To save your changes, select Exit, select Save Changes and Exit, and then select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Your changes take eect when the computer restarts.
40 Chapter 8 Securing your computer and information