Maintenance and Service Guide

2 Getting to know your computer
Your computer features top-rated components. This chapter provides details about your components, where
they are located, and how they work.
Right side
Table 2-1 Right-side components and their descriptions
Component Description
(1) Memory card reader Reads optional memory cards that enable you to store, manage, share, or
access information.
To insert a card:
1. Hold the card label-side up, with connectors facing the computer.
2. Insert the card into the memory card reader, and then press in on the
card until it is rmly seated.
To remove a card:
Pull the card out of the memory card reader.
(2) Audio-out (headphone)/Audio-in
(microphone) combo jack
Connects optional powered stereo speakers, headphones, earbuds, a
headset, or a television audio cable. Also connects an optional headset
microphone. This jack does not support optional standalone microphones.
WARNING! To reduce the risk of personal injury, adjust the volume before
putting on headphones, earbuds, or a headset. For additional safety
information, see the Regulatory, Safety, and Environmental Notices.
To access this guide:
Type HP Documentation in the taskbar search box, and then select
HP Documentation.
NOTE: When a device is connected to the jack, the computer speakers are
disabled.
(3) Power light On: The computer is on.
Blinking: (select products only): The computer is in the Sleep state, a
power-saving state. The computer shuts o power to the display and
other unnecessary components.
O: Depending on your computer model, the computer is o, in
Hibernation, or in Sleep. Hibernation is the power-saving state that
uses the least amount of power.
Right side 5