Maintenance and Service Guide

Touchpad
Table 5-8 Touchpad description and part number
Description Spare part number
Touchpad, natural silver L63600-001
Touchpad, ash silver L63599-001
Touchpad, snow white L63601-001
NOTE: The touchpad spare part kit does not include the cable. The cable is available as spare part
number L63602-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the bottom cover (see Bottom cover on page 26).
3. Remove the battery (see Battery on page 28).
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the touchpad (1).
2. Remove the protective tape and sponge from the touchpad.
3. Remove the two Phillips M2.0 × 2.5 screws (2) that secure the touchpad bracket to the computer, and
then remove the bracket (3).
4. Remove the three Phillips M2.0 × 2.0 screws (4) that secure the touchpad to the computer, and then
remove the touchpad (5).
Reverse this procedure to install the touchpad.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts