Maintenance and Service Guide

▲ Starting from the right side, use a tool to lift and release (1) the webcam module from the metal
tape behind it (2). Lift the module from the display back cover (3), if tape is installed, remove the
tape from the connector (4), and then disconnect the cable (5).
The webcam is available as spare part number L63564-001.
8. If it is necessary to remove the display panel:
a. Use tweezers to grasp the tape that routes behind both the left and right sides of the display panel
(1).
46 Chapter 5 Removal and replacement procedures for authorized service provider parts