User's Guide

3-13
Converting 2.6-Gb-Drive Jukeboxes to 5.2-Gb-Drive Jukeboxes
Converting From Jukeboxes Using 2.6-Gbyte Drives to Jukeboxes
Using 5.2-GByte Drives
Step 5: Replace the SCSI Interface PCA
1. Remove the four T-20 screws that mount the SCSI interface assembly as shown
in Figure 3-8
Figure 3-8 Removing the SCSI Interface Assembly
2. Disconnect the SCSI, GPIO, and power cables from the SCSI interface PCA.
3. Remove the six T-20 screws that mount the PCA. Remove the PCA.
4. Mount the replacement interface PCA.
5. Connect the SCSI, GPIO, and power cables.
• #1 - drive interface cable
• #2 - power cables (use either one)
• #3 - SCSI cable