User's Guide

1-3

First Steps

Upgrades, Conversions, and Kit Contents

These instructions explain how to install upgrade/conversion kits for the following:

•

Adding two drives to upgrade a four-drive jukebox to a six-drive jukebox.

• Adding four drives to upgrade a six-drive jukebox to a ten-drive jukebox.

• Activating and additional 110 slots to upgrade a 128-slot jukebox to a 238-slot

jukebox.

•

Converting 2.6 Gb, four- or six-drive, 128-slot jukeboxes to 5.2 Gb, four- or

six-drive, 128-slot jukeboxes.

•

Converting 2.6 Gb, 6-, 8-, 10-, or 12-drive, 238-slot jukeboxes to 5.2 Gb 4-, 6-,

or 10-drive, 238-slot jukeboxes.

NOTE A “J,” “K,” and “L,” suffix on a kit number denotes the sales channel in which it is

distributed.

What is an Upgrade?

Upgrades add drives or available slots to the jukebox.

The 5.2-Gb-drive-based jukebox is.shipped with a all slots installed. The slot

upgrade is done on a “half” jukebox and makes an additional 110 of these

pre-installed slots available for use. Total slots available becomes 238.

For an upgrade, use the following steps:

Step 1 - Check the upgrade kit contents and that you have the necessary equipment,

tools, and firmware.

Step 2 - Go to Chapter 2, “Upgrading Drives and Capacity in 5.2 Gb Drive

Jukeboxes”

Step 3 - Go to Chapter 4, “Checking/Downloading Firmware”

Step 4 - Go to Chapter 5 - “Verifying Proper Jukebox Operation and Labeling.”