Specifications

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 39).
5. Remove the display panel (see
Display panel on page 50).
6. Remove the service cover (see
Service cover on page 40).
7. Remove the hard drive (see
Hard drive on page 41).
8. Remove the RTC battery (see RTC battery (see
RTC battery on page 54).
9. Remove the memory modules (see
Memory modules on page 43).
10. Remove the WLAN module (see
WLAN module on page 44).
11. Remove the optical drive (see
Optical drive on page 46).
12. Remove the base enclosure (see
Base enclosure on page 55).
Remove the system board:
1. Remove the following cables:
●
Power button board cable (1) and (4)
●
TouchPad board cable (2)
● Keyboard cable (3)
2. Remove the 6 screws (5).
Component replacement procedures 77