HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 97

Code 128 Set Length 1

Specifies one of the barcode lengths for Code 128 Length Control. Length 1 is the minimum label length if in

Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s data

characters only. The length can be set from 1 to 80 characters.

Table 5 provides some examples for setting Length 1. See page 193 for detailed instructions on setting this

feature.

Table 5. Code 128 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 80 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 128 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘8’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 128 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CC8L1

DEFAULT

01 = Length 1 is 1 Character