HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode 1D Code Selection

106 Programming Reference Guide

I 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for I 2 of 5 Length Control. Length 1 is the minimum label

length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. The length includes the

barcode’s check and data characters. The length can be set from 2 to 50 characters in increments of two.

Table 7 provides some examples for setting Length 1. See page 193 for detailed instructions on setting this

feature.

Table 7. I 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

2 Characters 6 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digits

02 06 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT I 2 of 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘6’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

Select I 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CI2L1

DEFAULT

06 = Length 1 is 6 Characters