HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 107

I 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for I 2 of 5 Length Control. Length 2 is the maximum label

length if in Var ia ble Len gt h Mode, or the second fixed length if in Fixed Length Mode. The length includes the

barcode’s check and data characters.

The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed

length).

Table 8 provides examples for setting Length 2. See page 193 for detailed instructions on setting this feature.

Table 8. I 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

Ignore This

Length

4 Characters 14 Characters 50 Characters

Pad with leading zeroes to

yield two digits

00 04 14 50

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT I 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘4’ ‘1’ and ‘4’ ‘5’ AND ‘0’

6 Scan ENTER/EXIT PROGRAMMING MODE

Select I 2 of 5 Length 2 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CI2L2

DEFAULT

50 = Length 2 is 50 Characters