HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 111

Standard 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for Standard 2 of 5 Length Control. Length 1 is the minimum

label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the

barcode’s check and data characters. The length can be set from 1 to 50 characters.

Table 9 provides some examples for setting Length 1. See page 193 if you want detailed instructions on setting

this feature.

Table 9. Standard 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting

01 Character 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Standard 2 of 5 Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CS2L1

DEFAULT

08 = Length 1 is 8 Characters