HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 115

Industrial 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for Industrial 2 of 5 Length Control. Length 1 is the minimum

label length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the

barcode’s data characters only. The length can be set from 0 to 50 characters.

Table 11 provides some examples for setting Length 1. See page 193 if you want detailed instructions on

setting this feature.

Table 11. Industrial 2 of 5 Length 1 Setting Examples

STEP ACTION EXAMPLES

1 Desired Setting 00 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Industrial 2 of 5 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can

then start again at the beginning.

CANCEL

$CU2L1

DEFAULT

01 = Length 1 is 1 Character