HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Enter/Exit Programming Mode 1D Code Selection

122 Programming Reference Guide

Codabar Set Length 1

This feature specifies one of the barcode lengths for Codabar Length Control. Length 1 is the minimum label

length if in Vari able Le ngth Mode, or the first fixed length if in Fixed Length Mode. Length includes the

barcode’s start, stop, check and data characters. The length must include at least one data character. The length

can be set from 3 to 50 characters.

Table 13 provides some examples for setting Length 1. See page 193 for detailed instructions on setting this

feature.

Table 13. Codabar Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (and pad

with leading zeroes)

03 Characters 09 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODABAR LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘3’ ‘0’ and ‘9’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Codabar Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CCBL1

DEFAULT

03 = Length 1 is 3 Characters