HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 123

Codabar Set Length 2

This feature specifies one of the barcode lengths for Codabar Length ControlCodabar Length Control. Length

2 is the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed Length Mode.

The length includes the barcode’s start, stop, check and data characters. The length must include at least one

data character.

The length can be set from 3 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed

length).

Table 14 provides examples for setting Length 2. See page 193 for detailed instructions on setting this feature.

Table 14. Codabar Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (and pad

with leading zeroes)

00 Ignore This

Length

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODABAR LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Codabar Length 2 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CCBL2

DEFAULT

50 = Length 2 is 50 Characters