HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

1D Code Selection Enter/Exit Programming Mode

Programming Reference Guide 129

Code 11 Set Length 1

This feature specifies one of the barcode lengths for Code 11 Length Control. Length 1 is the minimum label

length if in Vari able Le ngth Mode, or the first fixed length if in Fixed Length Mode. Length includes the

barcode’s check and data characters. The length can be set from 2 to 50 characters.

Table 15 provides some examples for setting Length 1. See page 193 for detailed instructions on setting this

feature.

Table 15. Code 11 Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

02 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 11 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

Select Code 11 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to

abort and not save the entry string. You can then start

again at the beginning.

CANCEL

$CC1L1

DEFAULT

04 = Length 1 is 4 Characters