HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Customizing Configuration Settings
Programming Reference Guide 7
Symbology-Specific Parameters
1D Symbologies : Includes options concerning the barcode label types (symbologies). These settings allow you
to enable/disable symbologies, set label lengths, require check digit, etc.
2D Symbologies
: Includes options concerning the barcode label types (symbologies). These settings allow you
to enable/disable symbologies, set label lengths, require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over interfaces by scanning the following label.
Resetting the Product Configuration to Defaults
Restore Custom Defaults
If you aren’t sure what programming options are in your imager, or you’ve changed some options and want to
restore the Custom Default Configuration that may have been saved in the scanner, scan the Restore Custom
Default Configuration barcode below. This will restore the custom configuration for the currently active
interface.
Custom defaults are based on the interface type. Configure the imager for the correct
interface before scanning this label.
Transmit Software Version
Restore Custom Default Configuration
$P,HA00,P(CR)