HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

PDF417 Enter/Exit Programming Mode
Programming Reference Guide 169
PDF417 Set Length 1
Specifies one of the barcode lengths for PDF417 Length Control. Length 1 is the minimum label length if in
Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length includes the barcode’s data
characters only. Characters can be set from 0001 to 2,710 characters (pad with zeroes) in increments of 01.
Any value greater than 2,710 will be considered to be 2,710.
See page 193 for detailed instructions on setting this feature.
Select PDF417 Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to
abort and not save the entry string. You can then start
again at the beginning.
CANCEL
$CP4L1
~
DEFAULT
0001 = Length 1 is 1 Character