HP Integrated Barcode Scanner HP Integrated Barcode Scanner Programming Reference Guide

Micro PDF417 Enter/Exit Programming Mode
Programming Reference Guide 173
Micro PDF417 Set Length 2
This feature specifies one of the barcode lengths for Micro PDF417 Length Control. Length 2 is the maximum
label length if in Variable Length Mode, or the second fixed length if in Fixed Length includes the barcode’s
data characters only. Characters can be set from 0001 to 0366 characters (pad with zeroes) in increments of 01.
Any value greater than 0366 will be considered to be 0366.
See page 193 for detailed instructions on setting this feature.
Select Micro PDF417 Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to
abort and not save the entry string. You can then start
again at the beginning.
CANCEL
$CMIL2
~
DEFAULT
Length 2 is 0366 Characters